AL MAT heating mats are intended to be used under laminate and wooden floating floors and to be installed in so-called wet areas – in bathrooms, for example. They are a variant of ECOFILM heating foils designed for applications where ECOFILM foils cannot be used.
The heating element is composed of special conductors with double fluoropolymer insulation and high-temperature resistance (permanent load up to 70°C). This guarantees an above-standard lifespan for the heating element while maintaining maximum safety – the materials used are self-extinguishing.
The mat is the two-core type, with one 3m long connecting cable (so-called cold lead). The conductors are placed between two self-adhesive aluminum foils - the top layer, which is in contact with the covering, is reinforced with PE fabric for high mechanical resistance. The thickness of the mat is only 1.7 mm (!).
Installation is the same as in the case of the usual heating mat (by cutting the fabric when needed), except that it is necessary to connect the individual strips conductively – the aluminum foil is connected to a protective conductor and functions as a protective grid. For this purpose, conductive self-adhesive strips produced by 3M are included with the product.
Year of market release: 2013
Green technology: YES
Electric radiant heating is an energy-efficient choice that sets a green foundation for the whole household and provides several eco-friendly advantages.
The last, but not the least, is the fact that our own factories are fully electrified, have the large-capacity battery storage together with the powerful FVE, and do not produce Greenhouse Gases
Inside installation only.
Installation should be made based on installation manual.
The highest effects and benefits are achieved in the well-insulated buildings. When heat losses are minimal, the required power and consumption are minimal too.